Embroidery Menu; Starting To Embroider With The Start-Stop-Button On Head Frame; Interrupting With The Foot Control; Completing The Color - Bernina 830LE Manual

156

Embroidery Menu

► the Embroidery menu opens with the embroidery motif
► the embroidery motif is ready to be embroidered
Starting to Embroider With the Start-
Stop-Button on Head Frame
► keep the Start-Stop-button
depressed until the embriodery computer starts
► the embroidery computer sews approximately 7 stitches
and stops automatically
► a screen indicates that the thread tail has to be cut at
the beginning of the motif
► raise the presser foot
► cut the thread tail at the beginning of the motif
► press the Start-Stop-button on head frame to resume
embroidering

Interrupting With the Foot Control

► when the embroidery computer is embroidering, press
the Start-Stop-button on head frame or tap the foot
control lightly
► the embroidery computer will stop immediately

Completing the Color

► press the Start-Stop-button on head frame or the foot
control again
► the embroidery computer embroiders all the sections in
the color activated
► the embroidery computer stops automatically when
complete
► both threads are automatically cut

Starting to Embroider With Foot Control

► press the foot control
► the embroidery computer stops automatically after
approx. 7 stitches
► a screen indicates that the thread tail has to be cut at
the beginning of the motif
► release the foot control
► raise the presser foot
► cut the thread tail at the beginning of motif
► when embroidering with the foot control always keep it
depressed

Changing Color

► the embroidery computer is automatically ready to
embroider the next color
► change color of the upper thread accordingly
► embroider with the new color
on the head frame