Bernina 830LE Manual page 29

Presser Foot Position
► touch the button = the presser foot is lowered
and raised slightly again so the fabric can be
easily positioned. When sewing starts the foot
is lowered on to the material
► touch the button again = the presser foot is
raised and the Feed-dog is simultaneously
lowered
Automatic Securing Program
► touch the button before the sewing starts or
during sewing = single patterns are secured at
the end, with the selected number of stitches
programmed
► touch the button before starting a combination
= the first pattern is secured at the end, with
the number of stitches programmed
► touch the button while stitching a combination
= the active pattern is secured at the end, with
the number of stitches programmed
► the sewing computer stops automatically after
all securing variations
► the number and type of the securing stitches
can be programmed in the setup program
Slide Speed Control
► the motor speed is infinitely
variable with the slide
Altering Needle Positions
► touch left button – the needle
moves to the left
► touch right button – the needle
moves to the right
► quick change – hold the button
down
► total of 11 needle positions
(5 left, 5 right, 1 center)
Stitch Width/Length (Multi-
function) Knobs
► to adjust stitch width or length
► to alter thread tension
► to alter presser foot pressure
► to adjust the sewing direction when
in «directional sewing»
► to adjust button size or the slit size
of the buttonhole
► to adjust the balance
29