Combination Subdivider 1; Connecting Stitches - Bernina 830LE Manual

82

Combination Subdivider 1

► a combination can be subdivided into several sections
with the «Subdivider 1» function
► only the section where the cursor is positioned is sewn
► to sew the next section, the cursor must be placed in the
respective section
Combination Subdivider 2
► touch the «Multifunction» icon
► a combination can be split into various sections using
the «Combination Subdivider 2» function
► sew the first section, the sewing-/embroidery computer
stops automatically when it reaches the programmed
function
► reposition the fabric, press the foot control = the next
section is sewn etc.

Connecting Stitches

Move single Stitch Pattern
in a Combination
► touch the «Multifunction» icon
► touch «Move» icon
► touch the «Stitch selection» icon until the desired
pattern is activated
► using the stitch width and stitch length knobs, the touch
pen or a finger the individual stitch pattern in a combina-
tion can be moved horizontally, diagonally or vertically
Move multiple stitch pattern
of a Combination
► proceed as described in steps 1-3 above
► touch Combination» icon
► the active and any further stitch patterns are moved with
the stitch width and stitch length knobs, the touch pen or
a finger
T Test-sew first on a piece of the fabric you
i intend to use for the sewing project.