Ricoh Aficio MP 7001 Troubleshooting Manual page 42

2. Troubleshooting When Using the Copy/Document Server Function
Problem
When using "Combine",
parts of the image are not
copied.
2
Copies are not in correct
order.
Duplex
Problem
Cannot print in duplex mode. You have loaded paper on
Cannot print in duplex mode. You have loaded thick paper
Cannot print in duplex mode. [Apply Duplex] is set to [No]
Copies are not in correct
order.
When using "Duplex", copy is
made top to bottom even
though [Top to Top] is
selected.
40
Cause
You specified a reproduction
ratio that does not match the
sizes of your originals and
copy paper.
You placed the originals in
the incorrect order.
Cause
the bypass tray.
2
heavier than 128 g/m .
for "Paper Type".
You placed the originals in
the incorrect order.
You placed the originals in
the wrong orientation.
Solution
When you specify a reproduction ratio
using Manual Paper Select mode, make
sure the ratio matches your originals and
the copy paper. Select the correct
reproduction ratio before using
Combine mode. See "One-Sided
Combine", "Two-Sided Combine", or
"Auto Reduce/Enlarge", Copy and
Document Server Reference
When placing a stack of originals in the
ADF, the last page should be on the
bottom.
If you place an original on the exposure
glass, start with the first page to be
copied.
Solution
Remove paper loaded on the bypass
tray. Load paper in a tray other than
bypass tray.
Change the paper.
In [Tray Paper Settings], under "Paper
Type", set [Apply Duplex] to [Yes].
When placing a stack of originals in the
ADF, the last page should be on the
bottom.
If you place an original on the exposure
glass, start with the first page to be
copied.
Place the original in the correct
orientation. See "Duplex Copying",
Copy and Document Server Reference
.
.