Ricoh Aficio MP 7001 Troubleshooting Manual page 90

4. Troubleshooting When Using the Printer Function
Problem
Printing does not start.
Printing does not start.
4
Printing does not start.
Printing does not start.
Printing does not start.
Data In indicator does not
light up or flash.
[List / Test Print] is disabled.
88
Cause
If the machine is using
wireless LAN, SSID settings
are incorrect.
If the machine is using
wireless LAN, the receiver's
MAC address may be
preventing communication
with the access point.
The wireless LAN interface is
not working.
The login user name, login
password, or driver
encryption key is invalid.
Advanced encryption has
been set using the Extended
Security function.
If the Data In indicator does
not light up or flash even after
the print job starts, the
machine has not received the
data.
A mechanical error might
have occurred.
Solution
Check using the machine's display panel
that the SSID is correctly set. See
"Connecting the Machine", Network
and System Settings Guide
Check access point settings when in the
infrastructure mode. Depending on the
access point, client access may be
limited by MAC address. Also, check
there are no problems in transmission
between access point and wired clients,
and between access point and wireless
clients.
Confirm the orange LED is lit, and the
green LED is lit or blinks during
transmission.
Check the login user name, login
password, or driver encryption key.
Check the settings of the Extended
Security function with the administrator.
• When the machine is connected to
a computer via a cable, check the
computer print port settings are
correct. For details, see p.89
"When the Data In Indicator Does
Not Light Up or Flash".
• When it is networked with a
computer, contact the
administrator.
Contact your service representative.
.