Ricoh Aficio MP 7001 Troubleshooting Manual page 39

Problem
Copy paper becomes
creased.
Copies are not stapled.
Copies are not stapled.
Copies are stapled as
separate batches.
Staples are wrongly
positioned.
Paper does not output during
printing with stapling.
Saddle-stitched documents
come apart and do not stack
properly.
You want to check print
quality before making a large
print run.
You cannot combine several
functions.
When sorting, the pages are
divided into two blocks.
Cause
The paper is too thin.
There are jammed staples in
the stapler.
Copy paper is curled.
The number of copies is too
great for the stapler to staple
as a single batch.
Originals are not set
correctly.
When you stop printing while
using the staple function,
paper not stapled during
printing may be left in the
staple unit.
Certain types of paper are
resistant to folding and open
out after being folded and
stitched.
You can print a single copy
without specifying the setting
again.
Selected functions cannot be
used together.
The memory became full in
the middle of sorting and the
pages were delivered in two
blocks.
When You Cannot Make Copies As Wanted
Solution
Use recommended paper. See
"Recommended Paper Sizes and
Types", About This Machine
Remove jammed staples. See p.138
"Removing Jammed Staples".
Turn the copy paper over in the tray.
Check the stapler capacity. See
"Appendix", About This Machine
Check the correct position to place the
originals. For details about how to place
originals with stapling, see "Staple",
Copy and Document Server Reference
.
Press the [Clear Modes] key and cancel
copy settings, including stapling.
Use recommended paper. See
"Recommended Paper Sizes and
Types", About This Machine
Check print quality by printing out only
the first set using the [Sample Copy] key.
See "Finishing", Copy and Document
Server Reference .
Check the combination of functions and
make the settings again. See "Function
Compatibility", Copy and Document
Server Reference .
In [Copier / Document Server Features],
under [Input / Output], set [Memory Full
Auto Scan Restart] to [Off].
.
2
.
.
37