Ricoh Aficio MP 7001 Troubleshooting Manual page 53

Message
"Check whether there are
any network problems."
[13-25]
"Check whether there are
any network problems."
[13-26]
Cause
In [Effective Protocol], the IP
address is not enabled, or an
incorrect IP address has been
registered.
The "Effective Protocol" and
"SIP Server IP Address"
settings are different, or an
incorrect IP address has been
registered.
Messages Displayed When Using the Facsimile Function
Solution
• In [System Settings], under
[Interface Settings], select
[Effective Protocol], and then check
that "IPv4" is programmed to
"Active". You can also use the Web
Image Monitor for confirmation.
See the Web Image Monitor's
Help.
• In [System Settings], under
[Interface Settings], select
[Machine IPv4 Address], and then
check the IP address is correctly
programmed. You can also use the
Web Image Monitor for
confirmation. See the Web Image
Monitor's Help.
• Contact the administrator.
• In [System Settings], under
[Interface Settings], check the IP
address is correctly programmed.
You can also use the Web Image
Monitor for confirmation. See the
Web Image Monitor's Help.
• Contact the administrator.
3
51