Ricoh Aficio MP 7001 Troubleshooting Manual page 35

Problem
The same copy area is dirty
whenever making copies.
Copies are too light.
Copies are too light.
Parts of images are not
copied.
Parts of images are not
copied.
Parts of images are not
copied.
Images appear only partially. The paper is damp.
Cause
• The original that has
already been printed is
scanned.
• Original Type is set to
[Text / Photo], and an
original with text and
photographs that can
hardly be distinguished
from each other is
loaded.
Image density is too light.
A light copy may result when
you use damp or rough grain
paper.
The original is not set
correctly.
The correct paper size is not
selected.
Even if you place originals in
the ADF correctly, margin of
a few millimeters on all four
sides of the original might not
be copied.
When You Cannot Make Clear Copies
Solution
On the control panel, press [Generation
Copy], and then begin copying.
Adjust the image density settings. See
"Adjusting Copy Image Density", Copy
and Document Server Reference
Use recommended paper only and be
sure its storage environment meets the
recommended temperature and
humidity conditions. For details about
recommended paper and the proper
way to store it, see "Recommended
Paper Sizes and Types" and "Paper
Storage", About This Machine
Set originals correctly. See "Placing
Originals", Copy and Document Server
Reference .
Select the proper paper size.
Use "Create Margin" function to reduce
the image of its original size.
For details about missing image area,
see "Create Margin", Copy and
Document Server Reference
Use paper that has been stored in the
recommended temperature and
humidity conditions. For details about
the proper way to store it, see "Paper
Storage", About This Machine
2
.
.
.
.
33