Ricoh Aficio MP 7001 Troubleshooting Manual page 85

Message
"Insufficient Memory"
"Memory Retrieval Error"
"No response from the server.
Authentication has failed."
"Output tray has been
changed."
Cause
A memory allocation error
occurred.
A memory allocation error
occurred.
A timeout occurred while
connecting to the server for
LDAP authentication or
Windows Authentication.
The output tray was changed
because the paper size of the
specified output tray is
limited.
Messages Displayed When Using the Printer Function
Solution
PCL 5e/6
On the printer driver's [Print
Quality] tab, specify a lower
resolution on the [Resolution].
PostScript 3
On the printer driver's [Paper/
Quality] tab, specify a lower
resolution on the [Resolutions:].
RPCS
On the RPCS printer driver's [Print
Quality] tab, open the [Change
User Settings...] dialog box, and
then, on the [Image Adjustments]
tab, specify a lower value for
[Resolution:].
Turn the main power switch off, and
back on again. If the message appears
again, replace the RAM.
Check the status of the server.
Specify the proper output tray.
4
83