Ricoh Aficio MP 7001 Troubleshooting Manual page 108

5. Troubleshooting When Using the Scanner Function
Message
"Destination list / machine
settings are updated.
Selected destinations or
function settings have been
cleared. Please re-select the
settings."
5
106
Cause
The destination list is being
updated from the network
using SmartDeviceMonitor
for Admin. Depending on the
number of destinations to be
updated, there may be some
delay before you can resume
operation. Operations are
not possible while this
message is displayed.
Solution
Wait until the message disappears. Do
not switch off the power while this
message is displayed.