NEC Express5800 series User Manual page 50

44 DataViewer
Specify the OID in Item field. Some OIDs are selectable from the [Browse...] button.
1.
Then check the Enable Polling check box.
NOTE:
When using the [Browse...] button, the location where the Index needs
to be specified is shown by "Transmitted Error Packets. [%index%]" in
the comment column.
When these OIDs are selected, character strings ending with "." such as
"1.3.6.1.2.1.10." are set in the item field. Enter the index value after ".".
Set the duration and the interval. When the duration is 0, polling is continuous.
2.
Set the threshold limits and reset values for the OID. In addition to the text entry boxes,
3.
you can set the threshold using the sliding bars to the right.
Check Enable Sending Trap. This issues a trap corresponding to the current threshold
4.
settings.
Click [OK].
5.
In Item field, enter the OID including the Index.