NEC Express5800 series User Manual page 106

100 Notes
In such a case, follow the steps below to change map properties on Operation Window of
the main NEC ESMPRO Manager:
1) Right-click the target blade map icon, and select [Properties] from the pop-up menu.
2) Double-click [Background], and select an appropriate background image.
3) Double-click [Maximum Number of Blade Slot in Chassis], and set an appropriate
maximum number of slots.
4) Click [OK] to complete the settings.
About autodiscovery of SIGMABLADE
23.
When you autodiscover SIGMABLADE, some icons named IP address may be registered
outside of Blade Enclosure. These are, for example, the floating IP of EM card, and the IP
used for out of band management. You can delete these icons manually as they are not
used for the management function provided by Manager.
About a value that displayed in "Rebuild Status" when LSI Logic's disk array controller is
24.
used
When a physical device is rebuilt, an incorrect value may appear in "Rebuild Status" of
the [Physical Device] window from [Disk Array] of DataViewer. In such a case, use
"Power Console Plus" (Management Utility of a disk array RAID system) to check the
actual rebuild status. You can check the rebuild completion with the [Physical Device]
window. When the rebuild successfully completes, "Status" is turned from "Rebuild" to
"Online".
Display of network speed on DataViewer
25.
When you monitor Linux servers, Speed will not be displayed on the Network General
window of DataViewer. In such a case, check it on target servers.
Ports used by NEC ESMPRO Manager and Agent
26.
NEC ESMPRO Manager and Agent use the following ports. If a firewall is placed
between Manager and Agent, or if Windows Firewall is enabled, open the following ports.
Between Manager and Agent
Function
Operation
(Autodiscovery)
Operation
(Server Status Polling)
DataViewer
Server Down Detection
Report
(SNMP)
Report
(TCP/IP In-Band)
Report
(TCP/IP Out-of-Band)
Manager
(Port)
Window -
Window Undeter-
mined
to Manager 162
to Manager 31134
to Manager
Direction Agent
(Port)
→ -
←
→ 161
←
→ Undeter-
← mined
→ Undeter-
← mined
Protocol Remarks
icmp icmp
UDP snmp
UDP snmp-trap
TCP -