ODBC data collection must be specified in NEC ESMPRO and matching information must be
entered in your selected database. Initiate ODBC data collection in NEC ESMPRO as follows:
Press the "Database ..." button on the Automatic Data Collection Setting window.
1.
Select ODBC and enter an ODBC Data Source Name.
2.
NOTE:
Data Source Name.
Click OK to save the setting and close the window.
3.
Add servers to the Collecting Servers list as follows:
4.
– Highlight the servers in the All Servers list.
– Click the Add button.
Specify collection cycles by selecting a Frequency, Day, Month, and Time for each server
5.
and press OK.
NOTE:
is stored in ODBC.
Set up your data base for ODBC collection as follows:
Install and configure the ODBC drive for your particular database.
1.
Set the environment in ODBC using the same Data Source Name used in the Statistical
2.
Data Saving Mode screen in NEC ESMPRO. (Step 2 in the preceding procedure.)
In your database manager software, create a database template or table with the following
3.
fields.
– DataName
– DataKind
– GetTime
– GetValue
– DataType
Save the database.
4.
Enter the name of this database into your ODBC driver's settings where appropriate.
5.
Enter what you have set as System Data Source, in ODBC
If automatic statistical data collection is not executed, no data
DataViewer 49