NEC Express5800 series User Manual page 16

10 Installing the NEC ESMPRO Manager
The "Installation Completed" screen appears. Click [OK].
11.
The installation of the NEC ESMPRO Manager is complete. You may close the NEC
ESMPRO Manager menu window manually.
Restart the computer before using the NEC ESMPRO Manager.
IMPORTANT:
remain on the screen after you click [OK]. In such a case, follow the
instructions below.
1. Click [Close] on the title bar of the setup window.
2. An End Program dialog appears. Click [End Now].
3. A confirmation dialog for sending an error report is displayed.
Click [Don't Send].
4. A dialog which says "1628: Failed to complete installation."
appears. Click [OK].
Installation of the NEC ESMPRO Manager has been successfully
completed. There will be no problem in later operations.
NOTE:
When installing the NEC ESMPRO Manager in an already existing
directory, the NEC ESMPRO Manager will not operate unless the
access permissions required for the Server Management Manager
operation have been set.
When installing the NEC ESMPRO Manager in a directory created by
the installation software, the following access rights are set:
Administrators
Everyone
SYSTEM
If you specified a user group other than the default (Administrators) as
the NEC ESMPRO User Group at the installation, Full Control access
rights will be set for it.
Depending on the environment, a setup window may
Except for Windows XP Home Edition
Full Control (All)(All)
Read (RX)(RX)
Full Control (All)(All)