NEC Express5800 series User Manual page 105

Under the following Windows XP environments, the Windows Firewall is enabled. In
this case, NEC ESMPRO Manager and NEC ESMPRO Agent cannot communicate
each other. Therefore, servers cannot be monitored.
– Windows XP Professional/Home Edition (Service Pack 2)
– Windows XP Professional x64 Edition
[Steps to open the Windows Firewall Port]
1) Open [Control Panel], and click [Security Center].
2) On the [Windows Security Center] dialog box, click [Windows Firewall].
3) On the [Windows Firewall] dialog box, click the [Exceptions] tab and click [Add
Port...].
4) On the [Add a Port] dialog box, enter values in the [Name] and [Port number] fields,
select [TCP] or [UDP], and click [OK].
[Target Ports]
The following table shows the ports for the Windows Firewall to be set on the [Add a
Port] dialog box on a machine on which NEC ESMPRO is installed.
Name
(can be changed)
Inter-Manager
communication
SNMP Trap
High Reliable
Notification
Express Notification
via Manager
Web Component
Monitoring a server where multiple IP addresses are set for a single network card.
[Problem]
If a monitored server has multiple IP addresses for a single network card, the IP address
of the SNMP Response packet from NEC ESMPRO Agent may differ from the source
address in the IP header of the SNMP Request packet from NEC ESMPRO Manager.
In such a case, if NEC ESMPRO Manager receives the Response packet from NEC
ESMPRO Agent before Windows Firewall Service starts, the server cannot be
monitored thereafter.
[Steps to avoid this issue]
On the Operation Window, open [Properties] on the server icon, change the IP address
to another one that is set on the monitored server, and reboot the Manager computer.
Autodiscovery of Blade Servers
22.
When you execute Autodiscover and register blade servers, the number of slots for storing
blades may be displayed differently from the actual one, and icons may be placed outside
of the frame.
Port Protocol
number
8806 TCP
162 UDP
31134 TCP
31136 TCP
80 TCP
Environment
When Inter-Manager communication is
used.
When Manager Notification (SNMP) is
used (default).
When Manager Notification (TCP/IP in
Band) is used.
When Express Notification Service is
used via Manager.
When Web Component is used.
Notes 99