Web Component - NEC Express5800 series User Manual

WEB COMPONENT

About the virtual directory for the Web Component after uninstalling
1.
If you have changed the default virtual directory name (esmpro) of IIS used by the Web
Component, the virtual directory is not deleted even when you uninstall the Web
Component. In such a case, uninstall the Web component, and then manually delete the
virtual directory.
About display of SCSI Slot General on the Web Component
2.
If you are trying to see the ft server information "SCSI Slot General" of the NEC
ESMPRO Agent Ver. 3.8 series on DataViewer of the Web Component installed on NEC
ESMPRO Manager Ver. 4.07 or later, the following items may not be correctly displayed:
– Vendor
– Model
– Revision
– Serial Number
Security levels of Internet Explorer when the Web Component is used
3.
The Web Component uses the JavaScript function of Internet Explorer.
Therefore, set the security level of Internet Explorer for the Web Component to "Medium"
or lower.
Note that the Security level for the Internet zone of Internet Explorer is set to "High" on
Windows Server 2003 by default. In such a case, set the security level to "Medium" or
lower, or add the Web Component site in the Trusted Sites list.
When you use the Web Component through Internet Explorer on Windows Server 2003
4.
If you use the Web Component through Internet Explorer on Windows Server 2003, titles
(e.g., tool name, host name, and manager name) may not be correctly displayed on the
title bar. In such a case, see the information displayed in the window.
Autodiscovery of Blade Servers
5.
When you execute Autodiscover and register blade servers, the number of slots for storing
blades may be displayed differently from the actual one, and some blade images may not
be displayed.
In such a case, follow the steps below to change amp properties on Operation Window of
the main NEC ESMPRO Manager:
1) Right-click the target blade map icon, and select [Properties] from the pop-up menu.
2) Double-click [Background], and select an appropriate background image.
3) Double-click [Maximum Number of Blade Slot in Chassis], and set an appropriate
maximum number of slots.
4) Click [OK] to complete the settings.
About autodiscovery of SIGMABLADE
6.
When you autodiscover SIGMABLADE, some hosts named IP address may be registered.
Notes 103