Setting The Agent Settings - NEC Express5800 series User Manual

86 Web Component

Setting the Agent Settings

The NEC ESMPRO Agent settings must be set on the target server to run the Remote Shutdown
function.
Select NEC ESMPRO Agent from the Control Panel.
1.
Select "Permit Remote Shutdown / Reboot" on the General tab.
2.
Click [Report Setting] on the General tab to open the Alert Manager window.
3.
Select Base Setting from the Setting menu to open the Base Setting window. Select the
4.
Other tab and check whether the icon displayed on the left of the "Shutdown Delay" item
is green as shown below. If not, click the icon to change it to green.
Click [OK] to exit the menu.
5.