3.5 Adjustments/Adaptation To Different Gases
Qualified personnel MUST
if required. Failure to use qualified personnel will void the Dean warranty.
1. Proper operation of appliances requires operator to inspect the following adjustments in
Section 3.6 in terms of gas inputs and pressures.
2. Dean 24G Series Flatbottom gas fryers are manufactured to use the type of gas and pressure
specified on the rating plate. When changing gas, adaptation must be performed by
qualified personnel as defined in Section 1.5. Failure to use qualified personnel will void
the Dean warranty.
This appliance was configured at the factory for a specific type of gas. Converting
from one gas type to another requires the installation of specific gas-conversion
Switching to a different type of gas without installing the proper conversion
components may result in fire or explosion. NEVER ATTACH THIS APPLIANCE TO A
GAS SUPPLY FOR WHICH IT IS NOT CONFIGURED!
Conversion of this appliance from one type of gas to another should only be
performed by qualified, licensed, and authorized installation or service personnel, as
24G SERIES FLATBOTTOM GAS FRYERS
CHAPTER 3: INSTALLATION INSTRUCTIONS
MUST perform any adaptation, modification, or gas conversion,
MUST
MUST
components.
defined in Section 1.5 of this manual.
WARNING
DANGER
3-9