Installing The Printer Driver (Windows Nt 4.0/Windows 2000/Windows Xp) - Xerox DocuPrint C1618 User Manual

The procedure for installing the printer driver to Windows NT 4.0/Windows 2000/Windows
XP is as follows. If the printer is used as a network printer, it is assumed that the network
environment client settings of the computer have been completed.
Refer to the Network Print Environment User Guide about installation of the printer driver on Port9100 or IPP port
for Windows 2000/Windows XP.
q Before installing the printer driver on a Windows NT 4.0 system, it is necessary to set up TCP/IP Protocol and
Microsoft TCP/IP Printing. Refer to the manuals on Windows NT 4.0 for details.
q You can select LPR Port or Standard TCP/IP Port as the output destination for the port on a Windows 2000
2
system. When you select LPR Port, before installing the printer driver, you are required to set up Print Services
for Unix on Windows 2000. Refer to the manuals on Windows 2000 for details.
Installing the Printer Driver
Procedure
1
Switch on the Printer.
2
Switch on the computer.
Activate Windows NT 4.0 or Windows 2000/Windows XP and log on as a user of the administrator
group or as the administrator.
When the printer is connected to the computer, a dialog box indicating that new hardware has been
detected is displayed when you activate Windows 2000. In this case, click Cancel to close the dialog
box.
3
For NetWare environment, log on to the target file server.
4
Insert the Software Pack CD-ROM into the CD-ROM drive.
The Fuji Xerox StartUp Tool dialog box appears automatically.
If the Fuji Xerox StartUp Tool does not appear automatically, double-click the Instal_e.exe icon in the
CD-ROM. Proceed to Step 6.
38
Installing the Printer Driver
(Windows NT 4.0/Windows
2000/Windows XP)
4.0/Windows