Xerox DocuPrint C1618 User Manual page 184

6.7 When an Error Message Appears on the Control Panel
Message
Sys Data Deleted
Press Set
No Paper in
All Trays
Push in
All Trays
Disk Full
Please Press Set
6
Load xxxx
in BypassTray
Check Paper
in BypassTray
"xxx" represents a paper size or paper orientation.
158
Meaning and Action
All system settings stored in the NV memory were deleted.
Action: Press the Set/Eject button to initialize the NV memory.
The printer settings may be deleted when you reset the NV
memory. Print the Printer Settings list and the Panel
Settings list to confirm settings.
"8.4.1 Confirming Printer Configuration and Network Settings".
"5.3 List of Menu Items"
There is no paper in any of the paper trays.
Action: Load paper into the trays.
"4.2.1 Loading Paper in the Paper Tray"
One of the trays is not properly inserted.
Action: Push the all paper trays completely back into the printer.
The hard disk became full during electronic sorting and data writing
was halted.
Action: Press the Set/Eject button.
It deletes print jobs from the printer. Print with one of the
following methods:
q Print fewer pages at a time.
q Deactivate the printer driver hard disk setting.
"3.6 Changing the Configuration for Options"
Paper size xxxx is not loaded in the bypass tray or is different from
the size specified on the computer.
Action: Load paper xxxx into the bypass tray. If the computer
settings are incorrect, cancel printing. Specify the correct
paper the computer and reprint.
"4.2.3 Loading Paper in the Bypass Tray"
"3.5.2 Canceling Printing at the Control Panel"
Paper is not properly loaded in the bypass tray or is different from
that specified on the computer.
Action: Make sure the paper is properly loaded into the bypass
tray. If the computer settings are incorrect, cancel printing.
Check the following settings on your computer, reconfigure
any that are incorrect, and reprint.
q Is the correct paper tray specified?
q Is the correct paper size specified?
"4.2.3 Loading Paper in the Bypass Tray" and "3.5.2 Canceling
Printing at the Control Panel"