Printing On Envelopes, Transparencies, And Custom-Size (Long) Paper; Printing On Envelopes - Xerox DocuPrint C1618 User Manual

Printing on Envelopes,

Transparencies, and Custom-size
(Long) Paper
If you are printing on special paper, you have to specify the type of paper and image quality
in the PCL6 printer driver when you send a print command from the application software.
Take care when setting envelopes, because setting them incorrectly may result in text being
printed on the wrong side or upside down.
When printing on transparencies or specialty paper, make sure that you set the type of
paper and image quality before sending the print command.
When frequently printing specialty paper in Windows, we recommend that you register the necessary settings in the
User Settings tab. Registering the settings saves you time, because you do not need to configure the driver each time
you print. For details about the User Settings tab, refer to Help.
3.7.1
Printing on Envelopes
Use the bypass tray to print envelopes.
The envelope sizes listed below are those suitable for use with this printer. Make
sure that the flap is closed, and set the envelopes with the flap facing to the right.
q Com-10
q Monarch
C5
q
q DL
q Do not use envelopes that have tape seals. Printing some types of
preglued envelopes may not be possible, depending on the
condition of the adhesive.
q Do not use envelopes larger than 88.9 mm wide and 139.7 mm long.
q Using poor-quality envelopes can cause creasing and inferior print
quality.
The following is an example of how to print the address on an envelope.
Example:
printed like this.
Flap
3
71