Xerox DocuPrint C1618 User Manual page 19

For Power & Earth Connection
Three power specifications are listed below. The specifications that apply to your
machine depend on your machine configuration. Connect the power plug only to a
properly rated power outlet. Otherwise, it can cause fire or electric shocks. If in
doubt, contact your Fuji Xerox or dealers.
• Rated voltage
Rated frequency
• Rated voltage
Rated frequency
• Rated voltage
Rated frequency
Never use multi-plug adaptors to plug multiple power plugs in the same outlet. Be
sure to operate the machine on a sole-use receptacle. Multiple connectors can
cause the outlet to overheat and cause fire.
Ensure that the plug connection is free of dust. In a damp environment, a
contaminated connector can draw a non-negligible amount of current that can
generate heat and eventually cause fire over an extended period of time.
Always use the power cord provided with your machine. When an extension power
cord is required, always use a properly rated cord.
• In Japan: 125 V/15 A
• In other countries: Contact your Fuji Xerox or dealers.
If you use a cord with an unspecified current rating, the machine or plug may emit
smoke or become hot to the touch externally.
Do not attempt to rework, pull, bend, chafe, or otherwise damage the power cord.
Do not place a heavy object on the cord. A damaged cord can cause fire or electric
shocks.
Never touch a power cord with wet hands. Danger of electric shock exists.
Stop operation immediately if your machine produces smoke, excessive heat,
unusual noise, or smell, or if water is spilt onto the machine. These conditions can
cause fire. Immediately switch off and unplug the machine, and contact your Fuji
Xerox or dealers.
100 V
50/60 Hz
110 V
60 Hz
220-240 V
50/60 Hz
xvii