Xerox DocuPrint C1618 User Manual page 163

Condition
(Continued from Is the printer properly configured for
previous page) use through a network? (When on a
The Ready network.)
indicator does not
blink or light when
you try to print
The network has a problem. (When on
a network).
Is the printer off?
The Ready Data may still remain inside the
indicator is on or printer.
blinking, but paper
is not output
Verification
6.3 The Printer Does not Print
Solution
Print the Printer Settings list to check the
network settings.
Correct any inappropriate settings.
q "8.4.1 Confirming Printer Configuration
and Network Settings"
q "1.2 Configuring the Printer"
q Network Print Environment User Guide
Check that the printer is on and execute
the print command from the computer
one more time.
If the problem persists, consult your
system administrator.
Press the "I" on the power switch to
switch on the printer.
"3.2.1 Switching On the Power"
Select to abort the print job or forcibly
output the remaining data.
q "3.5.2 Canceling Printing at the Control
Panel"
q "6.9 Forcing the Printer to Print Remaining
Data (When Printing is Halted)"
6
137