Installing The Printer Driver; Printer Configuration Flow - Xerox DocuPrint C1618 User Manual

1.2 Configuring the Printer
1.2.2

Printer Configuration Flow

This section describes the flow of printer configuration.
Refer to the flow chart and confirm that each requirement is met, according to
your needs.
1
*1 To use these protocols you need an optional network expansion card.
*2 Refer to "Configuring in NetWare Environment" in the Network Print Environment User Guide.
*3 Refer to "Configuring in TCP/IP Environment" in the Network Print Environment User Guide.
*4 Windows NT 4.0, Windows 2000, and Windows XP allow you to share the printer. For details
about how to share the printer and printing from client computers, refer to "Configuring in TCP/IP
Environment" in the Network Print Environment User Guide.
10
Yes
No
*1
With
With SMB
TCP/IP (LPD)
Are you using
TCP/IP?
Set IP addresses
Start LPD
Start SMB Start SMB
NetBEUI TCP/IP
(set as the
(set as the (set as the
default)
default) default)

Installing the printer driver

Are you using a
network?
With
With
Internet
port 9100
"1.2.3"
Start the
"1.2.4"
protocol
Start Start IPP
port9100
(set as the (set as the
default) default)
*4 *3
"Chapter 2"
Finish
*1
With
NetWare
Start
NetWare
(set as the
default)
*2
Configure the system
with the network utility
*3