2.
Click [Install Printer Driver].
3.
Follow the displayed screens to continue with the installation.
To set the [Port] for output destination, click [Add Port] on the [Printer Driver
Installation] dialog box, and then proceed as follows using the [Add Port] dialog box.
(1) Select [Others] and click [LPR Port] from [Available ports].
(2) Click [OK].
(3) On the displayed dialog box, enter the items at each text box, and then click [OK].
Installing the Printer Driver (Windows 2000/Windows XP/Windows
Server 2003)
The procedure is as follows:
Note
• Before installing the printer driver, check that the Internet protocol (TCP/IP) is installed in the Windows
2000/Windows XP/Windows Server 2003 computer. If the protocol is not installed, install it by
referencing the Windows 2000/Windows XP/Windows Server 2003 manual.
1.
Insert the Software Pack CD-ROM into the CD-ROM drive.
The [Fuji Xerox Setup Menu] dialog box appears automatically.
20
3 Printing Through LPD or Port9100