Selecting a Paper Output Tray
The following parameters can be specified:
Parameter
OUTUP/outup
OUTDOWN/outdown
Selecting a Paper Type
The following parameters can be specified:
Parameter
PTS/pts
PT1/pt1
PT2/pt2
POH/poh
PRC/prc
Specifying 2 Sided Printing
The following parameters can be specified:
Parameter
DUP/dup
TUMBLE/tumble
SIMP/simp
Note
• If several parameters are specified in one "lpr" command, data may not be printed correctly.
• The system default is used if no parameter is specified.
• If the print data specifies duplex or simplex printing, the specification by the data becomes valid and
overrides that by -C option.
Ejects prints to the rear tray (option).
Ejects prints to the center output tray.
Selects plain paper.
Selects heavyweight 1 paper.
Selects heavyweight 2 paper.
Selects transparency.
Selects recycled paper.
2 sided printing as follows:
2 sided printing as follows:
1 sided printing
Description
Description
Description
7.5 -C Option (lpr Command)
51