Print Language/Mode - Xerox DocuPrint 240A User Manual

Print Language/Mode

When setting the printer in a workstation, a printer name should be specified on the remote
host (printer).
The printer name depends on the print language/mode used for printing. The relationship
between printer name and print language/mode is as follows:
PS
PSASC/PSA
PSBIN/PSB
PS%n
PCL
HPGL/HPG
PLT%nH
LP
AUTO/ATO
*: When printing a PostScript or HP-GL file, you can register a logical printer whose output style is preset
using CentreWare Internet Services. For details about logical printers, refer to the Online Help for
CentreWare Internet Services.
Important
• If a printer name other than the above is specified at printing, the print mode set in CentreWare Internet
Services is used.
• When setting print languages/modes from the same workstation to a single printer, it is recommended to
set one kind each. If two or more kinds of languages/modes are set, the workstation may display the
same job number for some queries (lpq).
• To print an ASCII-format PostScript file, specify PSASC for data processing with TBCP enabled.
• To print a binary-format PostScript file, specify PSBIN for data processing with TBCP disabled.
• When PS is specified, the printer operates as if PSBIN is specified (factory shipping).
Note
• Lowercase characters may be used for a printer name.
• When outputting the PostScript file, the PostScript software kit (optional) is required and using the UNIX
Filter is recommended.
40
7 Printing From UNIX
Printer name
PostScript
PostScript
PostScript
PostScript (%n: Input the number of the logical printer (1 - 10) that is
registered on the CentreWare Internet Services*.)
PCL
HP-GL
HP-GL (%n: Input the number of the logical printer (1 - 10) that is
registered on the control panel or the CentreWare Internet Services*.)
Print mode set in CentreWare Internet Services
Auto discrimination mode
Print language/mode