Printing Using Tcp/Ip Direct Print Utility; Installation Procedure For Printing Using Tcp/Ip Direct Print Utility; System Configuration; Target Computers - Xerox DocuPrint 240A User Manual

2 Printing Using TCP/IP Direct Print
Utility
2.1 Installation Procedure for Printing Using
TCP/IP Direct Print Utility
TCP/IP Direct Print Utility is a software developed by our company which allows print data
to be sent directly from Windows
the same network without going through the server.
This section explains the installation procedure for printing from a Windows 95/Windows 98/
Windows Me computer using TCP/IP Direct Print Utility.

System Configuration

To use TCP/IP Direct Print Utility, install the software on Windows 95/Windows 98/Windows
Me.
And you will need to set up the IP address on the printer and the computer.
Windows 95/Windows98/
Windows Me
Note
• The TCP/IP protocol is used for printing using TCP/IP Direct Print Utility. When the TCP/IP protocol is
used, the printer can limit print instructions by IP addresses. For details, refer to the Online Help for
CentreWare Internet Services.

Target Computers

TCP/IP Direct Print Utility can be installed in the following computers:
Connection
LPD port
Port9100 port
Note
• Before installing TCP/IP Direct Print Utility, check that the TCP/IP protocol is installed in the computer.
If the protocol is not installed, refer to the Windows 95/Windows 98/Windows Me/Windows Server 2003
manual for installation instructions.
• TCP/IP Direct Print Utility may not work normally if the printer has characters other than ASCII ones.
Set the computer name using ASCII characters (one uppercase alphabet, numeral, hyphen (-), or
underscore (_)).
®
95/Windows
LPD or Port9100 (TCP/IP)
OS
Windows 95
Windows 98
Windows Me

2.1 Installation Procedure for Printing Using TCP/IP Direct Print Utility

® ®
98/Windows Me computer to a printer on
Service/Client
- TCP/IP
Protocol
11