Xerox DocuPrint C2428 User Manual page 192

Xerox printers user guide
Table of Contents

Advertisement

6.5 List of Messages
Message
Replace Toner
Cartridge:Y
Replace Waste
TonerContainerUI
SeeBypassSetKey
xxxx
XXXX
Storing image...
xxxx
HDD
Time to replace
TonerContainerU1
Tray * - Check
6
Transparency Type
xxxx
Printing Tray*
xxxx.xxxx
Printing Tray*
192
Cause/action
Cause: Yellow toner cartridge is out of toner.
Action: Replace it with a new yellow toner cartridge.
"7.1 Replacing Toner Cartridge" (P.208)
Cause: Waste toner bottle is full.
Action: Replace it with a new waste toner bottle.
"7.3 Replacing Waste Toner Bottle" (P.216)
Cause: Your print instruction specified [Bypass-wait User].
Action: Load paper of size and orientation xxxx and paper size
XXXX in tray 5 (bypass tray), or check that this paper is
loaded in tray 5 (bypass tray). Then, press the <Eject/Set>
button on the control panel. Printing will start.
"4.2 Loading Paper" (P.117)
Status: Secure print job is being saved. Print data can be received
from the computer.
Status: The waste toner bottle needs to be replaced. Prepare a
new waste toner bottle. Print processing and print data
reception from the computer is enabled.
"7.3 Replacing Waste Toner Bottle" (P.216)
Cause: A Transparency with a white border is loaded in tray *.
Transparencies with white borders are not suitable for this
printer.
Action: Remove the jammed transparency, if there is one, and load
one of our recommended transparencies (such as V516
and JE001).
"4.2 Loading Paper" (P.117)
Status: Report/List is being printed.
Print data cannot be received by the computer while a report/list
is being printed.
Status: Secure print job is being printed. Print data can be received
by the computer.

Advertisement

Table of Contents
loading

Table of Contents