Loading Sra3 Paper Into Tray 5 (Bypass) - Xerox DocuColor 1632 User Manual
Copying user guide
Hide thumbs
Also See for DocuColor 1632:
- Service manual (1064 pages) ,
- Printing user manual (130 pages) ,
- Safety notes (15 pages)
Table of Contents
Advertisement
Loading SRA3 Paper into Tray 5 (Bypass)
1
Open Tray 5 (Bypass) by grasping the tray and gently pushing it
away and down from the printer/copier.
2
Adjust the front edge paper guide to the closest position forward
beyond the 12x18 in. position.
3
Load the SRA3 paper into Tray 5 (Bypass). Load the paper with
the side to be printed on facing down.
4
Adjust the back edge guide until it lightly touches the paper.
NOTE:
SRA3 paper is not recommended for copy jobs.
Performance using this paper size may vary. The maximum image
area is 303 x 476.6mm with a guaranteed area of 297 x 476.6mm.
CAUTION:
Do not place any objects or materials other than the
appropriate stock on Tray 5 (Bypass). Printer/copier damage may
occur.
U
G
( C
S E R
U I D E
O P I E R
1–23
)
Advertisement
Table of Contents
