Xerox DocuPrint C2428 User Manual page 125

Example: Changing the power saver mode settings
This section describes, as an example, how to set the time to switch the printer
to the power saver mode to [60Mins].
Procedure
Ready to print
(1) Press the <Menu> button.
Menu
Print Language
(2) Press the <
Menu
Admin Menu
(3) Press the <
Admin Menu
Network/Port
(4) Press the <
Admin Menu
System Settings
(5)Press the <
System Settings
System Settings
(Printer is in the standby mode.)
(The menu screen is displayed.)
> or < > button several times.
> button.
(The System Administrator Menu is displayed.)
> or < > button several times to select [System Settings].
> button.
([System Settings] is displayed.)
Alert Tone
(6)Press the < > or < > button several times to select [Power Save Mode].
Power Saver Mode
(7)Press the < > button.
Power Saver Mode (The power saver mode setting screen is
Disable * displayed.)
(8)Press the < > or <
use the power saver mode or not.
Power Saver Mode
Enable
(9) Press the <Ejece/Set> button (The setting for the power saver
mode is applied and * is displayed).
Power Saver Mode
Enable *
If you enable the power saver mode, proceed to step 10 to set
the time to switch the machine to the power saver mode. If not,
proceed to step 15.
(10) Press the <
System Settings
Power Saver Mode
(11) Press the <
[Power Saver Timer].
To the next page
5.1 Outline of Common Menu
> button several times to select whether to
> button.
([System Settings] is displayed.)
> or < > button several times to select
5
125