Xerox DocuPrint C2428 User Manual page 71

4
Select the desired custom definition from the [Details] list box.
5
In the [Change Setting For] group, specify the short edge and long
edge.
You can either enter the value with the keyboard or use the [ ] and [ ] buttons on the screen.
The short edge cannot be longer than the long edge even if it is still within the allowable range.
Conversely, the long edge cannot be shorter than the short edge even if it is still within the allowable
range.
6
To name the paper size, check the [Name the Paper Size] check box,
and then enter the name at the [Name] text box.
You can enter up to 14 characters for the name.
7
If necessary, repeat steps 4 to 6 to set the paper size.
8
Click [OK].
9
Click [Apply] on the [Configuration] tab.
10
When you customize custom sizes for Trays 1 to 4 on the control panel,
click [Get Information from Printer] on the [Options] tab.
The printer setting information is loaded into the printer driver.
"2.5 Loading Configuration of Options and Paper Settings of Trays"(P.57)
11
Click [OK].
3.3 Printing Non-Standard/Long Paper Sizes
4
5
6
3
71