Loading Tab Stock Into Any Tray; Loading Tab Stock Into Tray 5 (Bypass) Or Tray 8 (Post-Process Inserter) - Xerox 4110 Getting Started

Loading tab stock into any tray

Loading tab stock into Tray 5 (Bypass) or Tray 8 (Post-Process Inserter)

X er o x 4 5 90 / 4110 C o pi e r /P r i n te r G e t ti n g Sta r te d
When using single reverse tabs, load the tabs on the right with the
highest tab at the front of the machine; refer to the illustration
below:
When using single straight tabs, load the tabs on the left with the
highest tab at the front of the machine (the Bypass tray); refer to
the illustration below:
3 . Lo a di n g P ap e r
3-9