Xerox DocuPrint C2428 User Manual page 49

Rear view
19
18
Num
Name
ber
15 USB connector
16 Network interface
connector
17 Parallel interface
connector
18 Cover for printer options
19 Exhaust outlet
20 Power cord connector
21 Toner cartridge
22 Waste toner bottle
23 IDT unit
Drum cartridge
24 BTR unit
25 Fuser unit
Never touch the area (the fuser unit and surroundings) labeled as "High
Temperature". You can get burnt. If a sheet of paper is wrapped around the fuser unit
or the roller, do not try to remove it by yourself. You can get injured or burnt. Instead,
switch off the printer immediately, and contact our Customer Support Center or your
dealers.
2.1 Main Components and Their Functions
Inside
25
24
15
20
16
23
17
The connector to connect a USB cable.
The connector to connect a 10Base-T/100Base-TX Ethernet
interface cable.
The connector to connect a Centronics-compatible interface cable
for a connection with a computer.
Open this cover when installing options such as additional memory.
Releases heat from the inside of the printer. Be sure not to block
the exhaust outlet with anything when setting up the printer.
The connector to connect a power cord.
The cartridge containing four colors of toner; black (K), cyan (C),
magenta (M), and yellow (Y).
The bottle to collect used toner for recycling.
The unit to integrate images individually created with each of four
photo conductors into one so that the transfer unit can print the
four-color image on paper.
The cartridge containing four photo conductors; black (K), cyan (C),
magenta (M), and yellow (Y).
The unit to transfer images created on the drum surface to paper.
The unit to fix toner on paper. Do not touch this unit as it becomes
very hot.
Function
21
22
2
49