Child Lock; To Activate The Child Lock; To Cancel The Child Lock; Connecting External Equipments - Panasonic DMR E50 Operating Instructions Manual

The Child Lock deactivates all buttons on the unit and remote control. Use it to prevent other people from operating the unit.
Remote control only

To activate the Child Lock

Hold down [ENTER] (10) and [RETURN] (23) simultaneously until "X HOLD" appears on the unit's display.
≥If you press a button while the Child Lock is on, "X HOLD" appears on the unit's display and operation is impossible.

To cancel the Child Lock

Hold down [ENTER] (10) and [RETURN] (23) simultaneously until "X HOLD" disappears.
≥If you cannot cancel the Child Lock, press [RETURN] (23) and then perform the operation.
First of all, please disconnect AC mains leads of all units which you are going to connect with before connecting and disconnecting
cables.

Enjoying more powerful sound

Refer to the relevant pages for details.
Enjoying 5.1-channel
surround sound with
Dolby Digital and DTS
To enjoy stereo or
Dolby Pro Logic
ªOther uses
Record to digital recording equipment or cassette deck ([A] [B] page 55)
Record from an video cassette recorder (page 57)
Use connection [B] to enjoy discs recorded with a sampling frequency of 96 kHz. Sound will not be output if you use connection [A] and set
"PCM Down Conversion" to "Off" due to copy protection. (Convert the signal to 48 kHz to enjoy this type of audio.)
For your reference
≥The equipment connections described are examples.
≥Before connection, turn off all equipment and read the appropriate operating instructions.
Note
You can enjoy Dolby Digital in stereo with this unit alone. (This unit does not have a DTS decoder.)

Child Lock

Connecting external equipments

Digital connection
Connect to an amplifier with
built-in decoders.
Analog connection
Connect to an analog amplifier
or system component.
Digital connection
Connect to a digital amplifier or
system component.
Page 55 SETUP— Sound
≥Set "PCM Down Conversion"
[A]
to "On".
≥Set "Dolby Digital" and "DTS"
to suit the equipment.
Change speaker settings on the
amplifier.
Page 55 SETUP— Sound
≥Set "PCM Down Conversion"
[B]
to "Off".
Page 55 SETUP— Sound
≥Set "PCM Down Conversion"
[A]
to "On".
≥Set "Dolby Digital" to "PCM".
≥Set "DTS" to "Off".
54
Pages 60, 62
—
Pages 60, 62
Pages 60, 62