Creating Play Lists - Panasonic DMR-HS2 Operating Instructions Manual

Creating play lists

[HDD] [RAM]
You can specify start and end points to create a scene, then
specify the order in which these scenes are played. These scenes
are not recorded separately so this doesn't use up much of the
disc's capacity.
≥The lists of programmes recorded in the HDD and the DVD are
displayed separately. It is necessary to select the playback drive
(HDD/DVD) you wish.
Preparation
≥Switch [DVD, TV] (15) to "DVD".
≥For the HDD:
Confirm that something has been recorded on the HDD.
For the disc:
Insert a disc that has been recorded on.
Press [HDD] or [DVD] (6) to select the playback
1
drive.
(page 18)
2
While stopped
Press [FUNCTIONS] (11)
Use [3, 4, 2, 1]
3
(10)
LIST" and press [ENTER]
CREATE PLAY LIST
4
Use search functions such as fast-forward and
slow-motion to find the start point of the scene and
(10)
press [ENTER] .
HDD
PLAY LIST No.3
PLAY LIST
Scene No.
Creation
001 PLAY 1
Start
End
Next
Exit
0 : 00 . 05
3
SELECT
Start End
ENTER
RETURN
--:--.--
0 : 00 . 05
(1) HDD:
The location of the whole programme's IN point
DVD-RAM:
The location of the whole disc's IN point
5
Use search functions such as fast-forward and
slow-motion to find the end point of the scene and
(10)
press [ENTER] .
HDD
PLAY LIST No.3
PLAY LIST
Scene No.
Creation
001
1
Start
End
Next
Exit
0 : 35 . 20
3 3
SELECT
Start End
ENTER
RETURN
0 : 35 . 20
0 : 00 . 05
(2) HDD:
The location of the whole programme's OUT point
DVD-RAM:
The location of the whole disc's OUT point
Use [3, 4]
6 (10)
to select "Exit" and press [ENTER]
(10)
.
.
to select "CREATE PLAY
(10) .
(1)
(2)
Using PLAY LIST to edit programmes (continued)
ªTo stop partway through
Press [RETURN] (23).
ªTo clear the play list screen
Press [PLAY LIST] (22) or [RETURN] (23).
The screen returns to the state it was in before you called up the
play list.
ªTo specify another scene
After storing the point in "Start" and "End", select "Next" after
step 5 and press [ENTER] (10), then repeat steps 4 and 5.
For your reference
≥You can fast-forward, rewind, pause, and slow-motion while
playing scenes just as you can during normal play.
≥One disc can have a maximum of 99 play lists and 999 scenes.
These numbers may be reduced under some conditions.
≥Playlists must be made in accordance with the encoding system
currently selected in "TV System", i.e. either PAL or NTSC
(page 75).
≥You cannot specify an end point before a start point or a start
point after an end point.
≥If you specify an end point but not a start point, the unit
determines the beginning of the programme as the start point.
Similarly, if you specify a start point but not an end point, the unit
determines the end of the programme as the end point.
≥You may not be able to specify start and end points if the material
is still pictures recorded on other equipment.
≥The unit pauses play when the end of the last programme on the
disc is reached during this procedure.
≥You can also display the CREATE PLAY LIST screen by
selecting "jj" at the bottom of the play list.
HDD
PLAY LIST
001 002
004 - - -
No. Date Total Scene Title
3
01 10/23 0:03 006 Auto action
No.
02 10/26 0:07 006 USJ
0 – 9
03 10/21 0:06 004 Dinosaur
/ :
SELECT
- - - - - - - - - - - - -
ENTER
RETURN
3
49
003
- - -
Edit
1
1
1
1
1
1