Leds Of Wgsw-2402A - Planet WGSW-404 User Manual

2.1.2 LEDs of WGSW-2402A

The LEDs indicate the status of 10/100 Mbps Ethernet ports, Over Heat, Fan Failure and Power. Figure
2-2 shows the LED panel of the Switch. Table 2-2 shows the functions of power and status LEDs. Table
2-3 shows the functions of the port status LEDs.
Status LED
Power LED
The LEDs are explained in the following tables.
LED
PWR
Over Heat
Fan Failure
LED
Link/Act
100/10
F
IGURE
10/100 Port Status LEDs
T 2-2 P
ABLE OWER AND
Color
Lights to indicate that the Switch has power.
Green
Lights to indicate that the Switch exceeds its operational
Red
temperature.
Lights to indicate that the fans are not active.
Red
T 2-3 P
ABLE
Color
Lights to indicate that the Switch is successfully
connecting to the network.
Green
Blinks to indicate the Switch is actively receiving or
sending the data over the port.
Lights to indicate that the port is operating at 100 Mbps.
Green Off to indicate that the port is operating at 10 Mbps while
the port's Link is on.
2-2 LED P
S ANEL
S LED
TATUS
Function
S LED
ORT TATUS
Function
- 7 -
S
S