Specifying The Port Configuration - Planet WGSW-404 User Manual

3. This screen is similar to the Megabit Profile Attributes screen. To complete this screen, perform
steps under 3 through 8 under section 5.15.2.4.1 "Megabit Profile".

5.15.2.6 Specifying the Port Configuration

To specify port configuration parameters:
1. From the QoS screen, use the Down Arrow key to highlight Port Configuration, and then press
the Enter key. The Port Configuration screen appears.
Note: For WGSW-2402A, Ports 1 through 24 are 10/100 Megabit ports, while ports 25 and 26 are
Gigabit ports. For WGSW-404, all ports are Gigabit ports.
F 5-169
IGURE
- 184 -