Status Leds; The Rear Panel; Power Connector - Planet FNSW-3200 User Manual

2.2.4 Status LEDs

One POWER LED to show power On/Off is on the front panel
and each port has two status LED indicators, as shown below.
L S / M
TATUS
ABEL EANING
C
OLOR
Steady 100M
U
PPER
orange
ROW
OFF 10M
L Steady Link
OWER
Green
ROW
Blink Activity
Green
Table B: The Switch's Port-LED Functions

2.3 The Rear Panel

Figure 2: Rear View for FNSW-3200

2.3.1 Power Connector

The Power Connector is designed to be use with the power cord
included in the product package. Attach the female end of the
cord to the power connector and the male end of the cord to a
grounded power outlet. The accepted power range is from
100VAC to 240VAC, 50/60Hz.
D
ESCRIPTION
Lit to indicate that a valid physical
UTP/STP connection exists on
that port runs in 100Mbps
Remains off and Link ON to in-
dicate the port runs in 10Mbps
Lit to indicate that a valid physical
UTP/STP connection is detected
Blink to indicate the port is re-
ceiving data packets
100-2 40V AC
5 0-60 H z
- 5 -