Static Filtering; Source Mac Address And Destination Mac Address Out-Filters - Planet WGSW-404 User Manual

recommend keep the value as default - unlimited. Non-flooding or other value will affect the
overall Switch performance as a result in some case.

5.8 Static Filtering

If you select Static Filtering from the Advanced Management screen, the following Static Filtering
screen appears, with Source MAC Address Out-Filters highlighted.
From the Static Filtering screen, you can select source and destination MAC address out-filters
(described below), or MAC address in-filters for static filtering by highlighting one of these options and
pressing the Enter key.
5.8.1 Source MAC Address and Destination MAC Address
Out-Filters
To access source or destination MAC addresses, use the following procedure:
1. To access source MAC addresses, select Source MAC Address Out-Filters and press Enter.
When the SRC MAC Out-Filter screen (shown on the following page) appears, go to step 3.
F 5-76
IGURE
- 107 -