Spanning Tree Protocol Configurations - Planet WGSW-404 User Manual

F 5-81 S T P S
IGURE PANNING REE ROTOCOL CREEN

5.9.1 Spanning Tree Protocol Configurations

If you highlight Spanning Tree Configurations in the Spanning Tree Protocol screen (see Figure 5-81)
and press the Enter key, a Spanning Tree Protocol Configuration screen similar to the following
appears. The top half of this screen displays read-only values. The bottom half, starting with Spanning
Tree Protocol, is user configurable. Use the Up and Down Arrow keys to highlight a field, then press
Enter to change the value. When you finish, press the Esc key until you return to the desired screen.
- 111 -