Dip Switches; Leds; Pre-Installation Checklist - Planet RT-101 User Manual

RT-101 User's Manual

Dip Switches

DIP Switches
SW1
OFF
ON
OFF
ON

LEDs

LED Status Table
LINK
Green LED
On
On
Flashing
Flashing

Pre-Installation Checklist

Before installing the Communication Server, you should:
•
Remove the Sensitive Information page at the front of
this manual and store it in safe place.
sensitive information on the Communication Server
10
SW2
OFF
OFF
ON
ON
ERROR
Red LED
Description
On During power On, both LEDs
should light then the Red
LED should go off.
both LEDs stay on, there is a
hardware problem.
Consult your dealer.
Off Normal Operation (Power On
Self Test OK)
Off Normal Operation (Receiving
Packets from LAN)
Flashing When both LEDs are flashing
intermittently, there is an
error.
for technical support.
security features.
Description
Normal Operation
Configuration Mode
Contact your dealer
If
It contains