Using the Touch Screen
Replacing the pen tip
If the pen tip is damaged, you can replace the pen tip as follows:
Hold the pen tip by inserting it into the hole of the ring and
remove the tip by pulling it out.
Insert the new pen tip into the S Pen.
Take care so that the pen tip does not spring out when taking
When the pointer on the screen does not precisely match the
points you touch, calibrate the touch screen using the Tablet PC
The calibration process for the touch screen may differ depending
on the operating system and may not be available in some
operating systems. The following descriptions assume the
Windows 8 operating system.
Click Charms menu on the Desktop > Settings
Control Panel > Hardware and Sound > Tablet PC
Settings > Calibrate.
Using the computer