Installation Procedure - Yamaha AW4416 Service Manual

AW4416

Installation procedure

1. You will need the following items.
• The AW4416 itself
• Internal CD-RW drive (option)
• Screws (included with the AW4416) for attaching the CD-RW drive (Pan washer head screw 3.0 X 4 VS676500)
• Red and white four conductor cable for CD-RW drive (Connector assembly V564820)
• Philips (+) screwdriver
• Work surface
• In order to install the CD-RW drive you will need to turn the AW4416 on itsback. Make sure that you have a sufficiently
broad work surface.
• The AW4416 is shipped with four screws for attaching the 2.5 inch hard disk, and four screws for attaching the CD-RW
drive, making a total of eight screws of the same type.
2. Make sure that the power of the AW4416 is turned off. For safety's sake, disconnect the power cable from the
AC outlet.
3. Turn the AW4416 upside down on the work surface.
38