Operation; Familiarising Yourself With And Operating The Controller - Vaillant geoTHERM VWS Operating Manual

5 Operation

5 Operation
5.1 Familiarising yourself with and operating the
controller
All programming of the heat pump is carried out by
means of the two dials ( and ) on the controller.
The dial is used to select the parameter (by pressing)
and to alter the parameter
(by turning). The dial
turning) and to activate special functions (by pressing).
1
6
5
Fig. 5.1 Operating overview
Key
1 Menu name
2 Cursor indicates the selected parameter
3 Menu number
4 Dial ,
position parameter (turn), select parameter (press)
5 Dial ,
select menu (turn), activate special operation (press)
6 Information line (in the example a handling request)
12
is used to select the menu (by
Basic data
Date
Day of week
Time
Set day
Typical operating process (operator level)
• Turn the dial
• Turn the dial
• Press the dial
• Turn the dial
• Press the dial
Operating Manual geoTHERM VWS 0020045200_00
2
3
4
until the menu
required has been selected.
until the
parameter to be modified
has been selected.
to mark the
parameter to be modified.
The parameter background
is darkened.
to modify the
parameter setting value.
to mark the
setting value to be accepted.