Traffic Announcements Using Tmc (Depending On The Model) - Becker Active 43 Series Operating Instructions Manual

Note:
Press the button to set a block
Block 24 h
for an entire day.
Press the button to also
Use setting for...
use the block on other days.
> Confirm your settings by pressing the
button.
OK
The Reset button
You can reset the navigation settings to
their factory settings.
The settings will then be reset. The fast ac-
cess mode data, stored routes, blocked
routes, voice and home address are re-
tained.
> Press the button.
Reset
> Press the button.
Yes
The navigation settings are reset to their
factory settings.
NAVIGATION MODE
Traffic announcements using TMC
(depending on the model)
Your Navigation device can receive traffic
announcements (TMC messages) from
radio stations. The power supply with the
integrated TMC antenna must be con-
nected to the carrier plate for this func-
tion.
Note:
TMC is not available in all countries.
Traffic announcements are transmitted by
radio stations via the TMC (Traffic Mes-
sage Channel) in addition to the radio
programme and are received and analysed
by the navigation system. Receiving traffic
announcements is free of charge.
>>>
> D
> GB
> F
> I
> E
> PL
> CZ
> H
> RU
73