Setting Poi Categories - Becker Active 43 Series Operating Instructions Manual

>>> NAVIGATION MODE
The following setting options are available
in the extended settings:
> D
•
Auto zoom
> GB
You can select how the map changes
when approaching an action point or at
> F
different speed.
> I
•
Select POI categories
You can select which symbols are dis-
> E
played for points of interest on the map.
•
> PL
Street names 2D
You can select whether the street names
> CZ
should be displayed (
3D or 2D mode.
> H
•
2D heading up
> RU
You can select whether the map should
always be orientated to the direction of
travel ( ) or to the north (
mode.
66
Autozoom
> Press the
tended settings.
/
Street names 3D
Pressing the
the zoom function on (
) or not ( ) in
When the zoom function is switched on,
you can select whether the autozoom ac-
tion should be weak, medium or strong.
) in 2D
*Function can be retrofitted
button in the ex-
Auto zoom
button switches
Auto zoom
) or off ( ).

Setting POI categories

You can select which POI symbols are to
be displayed on the map.
> Press the
Select POI categories
in the extended settings.
Selecting displays all points
Show all POIs
of interest on the map.
Selecting
Show no POIs
points of interest on the map.
Selecting
User defined selection
then pressing the
Select POIs
lows you to determine for yourself in the
menu which then appears whether each
individual points of interest category is
displayed or not.
button
displays no
and
button al-