Becker Active 43 Series Operating Instructions Manual page 49

If the route guidance is already running
and a waypoint has already been entered
you will be asked whether the new desti-
nation should replace the old destination
or the waypoint.
> Select
Replace stopover
.
old destination
Note:
If there is no GPS signal when the route
is calculated, the following will be dis-
played:
When a GPS signal is available, the route
or
Replace
calculation will start automatically.
When the
pressed, the last known position is used
and the route calculated from this posi-
tion.
button is
Last position
NAVIGATION MODE
Entering address by language (selected models)
You can start address entry using speech
from the fast access function or from the
menu for entering addresses by pressing
the button.
Notes:
• Only one address can be entered using
the voice entry function. Lists for more
precise selection cannot be operated
using speech.
• The destination country cannot be en-
tered using speech.
• The symbol in the list of countries
indicates the countries for which ad-
dress entry using speech is possible.
If entry using speech is not possible,
the button will be displayed
greyed out.
• An address and the street number must
be spoken in the language of the desti-
nation country.
After pressing the button, a menu
that shows you how to say an address will
be displayed.
>>>
> D
> GB
> F
> I
> E
> PL
> CZ
> H
> RU
49