Points Of Interest; Point Of Interest In The Vicinity - Becker Active 43 Series Operating Instructions Manual

Entries identified with the
open up a further list when they are select-
ed. This can be necessary if, for example,
the same town name occurs a number of
times in the set country.
Once you have selected the town or street
you want in the lists, the menu for enter-
ing addresses is displayed after a short time
with your entry filled in.
You can then start route guidance, display
the route or store the address as described
on page 48.
symbol

Points of interest

Points of interest (POI) are included in
the map and can be displayed there.
Points of interest include airports and fer-
ry ports, restaurants, hotels, petrol sta-
tions, public buildings. You can use points
of interests as navigation destinations.
Note:
You can only select points of interest in
the area in question if the GPS reception
is adequate for determining a position.
Otherwise, the last position stored will be
used.
> In the main menu, press the button
New destinationl
> Press the
Select Point of Interest
button.
You can choose between:
• a point of interest in the vicinity,
• a point of interest near to an address,
• a point of interest near to a destination,
or
• entering a point of interest directly.

Point of interest in the vicinity

.
> Press the
Press the arrow keys
through the list displayed.
> Select one of the available categories.
NAVIGATION MODE
button.
POI nearby
to scroll
>>>
> D
> GB
> F
> I
> E
> PL
> CZ
> H
> RU
51