Disconnecting A Connected Telephone; Telephone Calls; Establishing A Call; Accepting A Call - Becker Active 43 Series Operating Instructions Manual

Disconnecting a connected telephone

You may disconnect the connection to a
cell phone currently connected via Blue-
tooth.
> Press the button.
Disconnect
The connection to the cell phone current-
ly connected is disconnected.

Telephone calls

In the telephone calls section, you can
find a summary of the control options
that are available for establishing a call, ac-
cepting a call, and ending a call.

Establishing a call

> Enter a phone number or select an entry
from the number list or phonebook.
The number is dialed.
If the call is accepted by the party called,
the display changes and you are connected
to the other party.
TELEPHONE MODE

Accepting a call

For an incoming call, a ringing tone will
sound. Also the following is displayed.
If available, the telephone number and
name of the caller are displayed.
For incoming calls, you have several oper-
ating options:
Selection Significance
The call is accepted. The
Accept
call screen is displayed.
The call will be declined.
Reject
The caller hears the busy
signal. The screen last ac-
tive is displayed.
The ringing tone is
Ignore
switched off. The screen
last active is displayed.
The call is ended if the
caller hangs up.
>>>
> D
> GB
> F
> I
> E
> PL
> CZ
> H
> RU
109